HB-sphere/ball superfinishing/polishing/grinding/rolling/burnishing/furn...

HB-vibratory stress relief equipment/stress reliever

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-rotor superfinishing machine

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-superfinishing ,HB-superfinishing technology,non-abrasive,non-noise,n...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-superfinishing ,HB-superfinishing technology,non-abrasive,non-noise,n...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-peper cylindrical superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-rotor superfinishing -replace polishing,grinding,burnishing,furnishin...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-sphere/ball superfinishing/polishing/grinding/rolling/burnishing/furn...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-cylidrincal superfinishing

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-Superfinishing:
The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.
The surface bearing extends up to 80–90 %.

HB-vibratory stress reliever /welding stress rliever

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-peper cylindrical superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-rotor superfinishing -replace polishing,grinding,burnishing,furnishin...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-cylindrical superfinishing attachment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-cylindrical superfinishing attachment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-superfinishing technology,replace polishing,grinding,rolling............

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-rotor superfinishing -replace polishing,grinding,rolling,buffing,burn...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5,10,50,150 %.
The fatigue strength increases by 10,20,50,200 %.

HB-sphere/ball superfinishing/polishing/grinding/rolling/burnishing/furn...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5…10…50…150 %.
The fatigue strength increases by 10–20–50–200 %.

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5…10…50…150 %.

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5…10…50…150 %.

HB-cylindrical grinding attachment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5…10…50…150 %.

HB-vibratory stress reliever /welding stress rliever

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5…10…50…150 %.

HB-sphere/ball superfinishing/polishing/grinding/rolling/burnishing/furn...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.
The skin hardness increases depending on the initial hardness by 5…10…50…150 %.

HB-relieving residual stress,welding stress relieving,modification of re...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-relieving residual stress machine

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-residual stress relieving equipment /vibratory stress reliever

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.

HB-welding stress relieving /vibratory stress reliever/vibratory stress ...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-vibratory stress reliever /welding stress rliever

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.

HB-sphere/ball superfinishing/polishing/grinding/rolling/burnishing/furn...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness after HB-superfinishing will be less than Ra0.1μm from Ra6.3μm.

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
Contact:Brady

The surface roughness will be less than Ra0.1μm from Ra6.3μm.