superfinishing,polishing, finishing, grinding, burnishing, buffing, furbishing: 六月 2014

2014年6月30日星期一

HB-rotor superfinishing/screw pump rotor superfinishing

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086

HB-superfinishing equipment,
Obtain surface quality less than Ra0.1 easily,
can be used on all kinds of machine tools,
high production efficency,
improve workpieces service life,
Improve the micro-hardness 20%;
Improve the wear-resistance;
Improve the fatigue life 5 ~100 times;
Suitable for the hardness less than HRC65;
Improve corrosion resistance;
It’s a nonabrasive process, without abrasive, felt, lapping compounds and hard work.
Relieve the residual stress greatly;
Long service life of tool and workpieces;
It saves time, money and energy
No sawdust and sawdust wastes occurred,no noise and damage to the environment;
Easy to operate,the same turning.

HB-rotor superfinishing machine

HB-shaft superfinishing

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

great innovation for superfinishing,replace grinding,polishing,rolling.....

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

2014年6月29日星期日

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

HB-sphere/ball superfinishing/polishing/grinding/rolling/burnishing/furn...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

HB-superfinishing equipment,
Obtain surface quality less than Ra0.1 easily,
can be used on all kinds of machine tools,
high production efficency,
improve workpieces service life,
Improve the micro-hardness 20%;
Improve the wear-resistance;
Improve the fatigue life 5 ~100 times;
Suitable for the hardness less than HRC65;
Improve corrosion resistance;
It’s a nonabrasive process, without abrasive, felt, lapping compounds and hard work.
Relieve the residual stress greatly;
Long service life of tool and workpieces;
It saves time, money and energy
No sawdust and sawdust wastes occurred,no noise and damage to the environment;
Easy to operate,the same turning.

2014年6月25日星期三

JINAN HUABAO MACHINERY CO., LIMITEDHB-cylindrical superfinishing machine

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-cylindrical superfinishing machine

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-cylindrical superfinishinng equipment

HB-ball valve superfinishing;no abrasive;good production efficiency

HB-rotor superfinishing -replace polishing,grinding,burnishing,furnishin...

HB-rotor superfinishing-replace burning,polishing,grinding,furnishing,bu...

HB-cylindrical superfinishing attachment

HB-rotor superfinishing -replace polishing,grinding,rolling,buffing,burn...

HB-cylindrical grinding attachment

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

2014年6月24日星期二

HB-sphere/ball super finishing equipment

2014年6月23日星期一

HB-outer superfinishing machine

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology is a great innovation for metal surface superfinishing,
it can be used after turning directly and obtain surface quality for Ra0.1,
it can replace polishing,grinding,rolling and others process.

rotor superfinishing process

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology is a great innovation for metal surface superfinishing,
it can be used after turning directly and obtain surface quality for Ra0.1,
it can replace polishing,grinding,rolling and others process.

great innovation for superfinishing,replace grinding,polishing,rolling.....

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology is a great innovation for metal surface superfinishing,
it can be used after turning directly and obtain surface quality for Ra0.1,
it can replace polishing,grinding,rolling and others process.

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology is a great innovation for metal surface superfinishing,
it can be used after turning directly and obtain surface quality for Ra0.1,
it can replace polishing,grinding,rolling and others process.

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology is a great innovation for metal surface superfinishing,
it can be used after turning directly and obtain surface quality for Ra0.1,
it can replace polishing,grinding,rolling and others process.

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

HB-superfinishing,polishing, finishing, grinding, burnishing, buffing, f...

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology,replace polishing,grinding,rolling............

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-sphere/ball super finishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-outer superfinishing attachment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady
Position:sales manager

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady
Position:sales manager

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-size test after superfinishing

JINAN HUABAO MACHINERY CO., LIMITED
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady
Position:sales manager

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology,replace polishing,grinding,rolling............

The HB-superfinishing process was developed by the Jinan Huabao Machinery Co., Limited in 1999.
HB-superfinishing, also known as micromachining, microfinishing,is a metalworking process that improves surface finish and doesn't change workpiece geometry,
This is achieved by no removing any materials with none-abrasive;
HB-Superfinishing, very different from polishing,grinding,rolling and other process,
just one process.

HB-superfinishing technology,replace polishing,grinding,rolling............

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

HB-rotor superfinishing -replace polishing,grinding,rolling,buffing,burn...

HB-shaft superfinishing

HB-superfinishing ,HB-superfinishing technology,non-abrasive,non-noise,n...

HB-superfinishing for sphere/ball;no abrasive;good production efficiency

HB-superfinishing technology for runner plate

HB-superfinishing machine for cylindrical

HB-superfinishing machine for flat surface

HB-superfinishing machine for discontinuous valve

HB-flat surface super finishing machine

HB-superfinishing machine for runner plate surface

HB-vibratory stress relieving machine

Jinan Huabao machinery co., ltd
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady

Definition of VSR(vibratory stress relief)
Vibratory Stress Relief, often abbreviated VSR, is a non-thermal stress relief method used by the metal working industry
to enhance the dimensional stability and mechanical integrity of castings, forgings, and welded components,
chiefly for two categories of these metal workpieces:
It describes a physical process is this: that is tightly controlled using a vibration energy,
the metal work piece is processed to resolve the workpiece during and after the processing of
the internal and residual stresses occur dimensional changes resulting load capacity and resistance to change.
VSR（vibratory stress relief) to eliminate, reduce or homogenizing the residual stress of the metal workpiece, the workpiece
to improve resistance to static and dynamic load, the deformation resistance, stability,
efficacy superior dimensional accuracy.

VSR(vibratory stress relief) principle
From the micro level analysis, VSR can be regarded as a kind of cyclic loading is applied in the form of
an additional stress on parts. When the workpiece is subjected to vibration applied to the alternating stress
on parts and components in the residual stress superposition. When the result of superposition of the stress
reaches a certain value, the worst part of the stress concentration will exceed the yield limit of the material
is plastically deformed. This is where the residual plastic deformation reduces the stress peaks and strengthen
the metal matrix, and then the vibration but also in other parts of the stress concentration is generated on the
more serious the same effect until the vibration superposition of additional stress and residual stress of the
algebraic and not cause any part of the plastic deformation, at which time, and both vibration to eliminate residual
stress and strengthening of metal on the end of the process.

Company profile:
HUABAO was registered in 1983,it's a famous brand in RESIDUAL STRESS field,
integrating R&D and sale. Our company covers an area of 50000.
With our abundant experience and industrious and hardworking staff members,
we can meet various requirements from different types of customers.
Our production capacity amounts to 20000 sets per year.
We are mainly engaged in superfinishing technology,vibratory stress relieving(VSR),
welding stress relieving（WSR) and residual stress detecting(RSD) and our products sell well in the worldwide.
We conduct strict quality inspections over each product.
We will try our best to serve you and hope to become one of your friends and business partners.
HUABAO has been qualified with ISO9000 and CE,
the products always been used in the field of aviation, space, ship, military, railway, machine tool,
ore machine and so on and the products were exported to all over the world.

Application:
Carbon structural steel,
low alloy steel,
stainless steel,
cast iron,
non-ferrous metals (copper, aluminum, titanium and its alloy castings, forgings, etc.),
welding parts,
tooling,
machining parts.
automotive and aerospace tooling,
paper mill machinery,
mining machine，
turbine，
hydro-turbine and power generation equipment,
pumps,
gear boxes,
machine tool building and repair,
manufacturing of large precision components and parts,
Aviation,
Military,
Railway,
Metallurgy,
Roller,ect.
axis,
shaft,
sphere,
runner plate，
disk,
hydraulic cylinder，
electronics,
machinery,
automobile,
shipbuilding，
Textile Machinery，
Food Machinery，
Printing Machinery，
Petroleum Machinery，
Pharmaceutical Machinery

Huabao machinery co., ltd
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250014
Contact: Mr. Brady
Position:sales manager
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:info@vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
http://www.vsrsuperfinishing.com

HB-vibratory stress relief equipment

2014年6月22日星期日

HB-Vibratory stress relief machine

Huabao machinery co., ltd
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady
Position:sales manager

Definition of VSR(vibratory stress relief)
Vibratory Stress Relief, often abbreviated VSR, is a non-thermal stress relief method used by the metal working industry
to enhance the dimensional stability and mechanical integrity of castings, forgings, and welded components,
chiefly for two categories of these metal workpieces:
It describes a physical process is this: that is tightly controlled using a vibration energy,
the metal work piece is processed to resolve the workpiece during and after the processing of
the internal and residual stresses occur dimensional changes resulting load capacity and resistance to change.
VSR（vibratory stress relief) to eliminate, reduce or homogenizing the residual stress of the metal workpiece, the workpiece
to improve resistance to static and dynamic load, the deformation resistance, stability,
efficacy superior dimensional accuracy.

VSR(vibratory stress relief) principle
From the micro level analysis, VSR can be regarded as a kind of cyclic loading is applied in the form of
an additional stress on parts. When the workpiece is subjected to vibration applied to the alternating stress
on parts and components in the residual stress superposition. When the result of superposition of the stress
reaches a certain value, the worst part of the stress concentration will exceed the yield limit of the material
is plastically deformed. This is where the residual plastic deformation reduces the stress peaks and strengthen
the metal matrix, and then the vibration but also in other parts of the stress concentration is generated on the
more serious the same effect until the vibration superposition of additional stress and residual stress of the
algebraic and not cause any part of the plastic deformation, at which time, and both vibration to eliminate residual
stress and strengthening of metal on the end of the process.

Company profile:
HUABAO was registered in 1983,it's a famous brand in RESIDUAL STRESS field,
integrating R&D and sale. Our company covers an area of 50000.
With our abundant experience and industrious and hardworking staff members,
we can meet various requirements from different types of customers.
Our production capacity amounts to 20000 sets per year.
We are mainly engaged in superfinishing technology,vibratory stress relieving(VSR),
welding stress relieving（WSR) and residual stress detecting(RSD) and our products sell well in the worldwide.
We conduct strict quality inspections over each product.
We will try our best to serve you and hope to become one of your friends and business partners.
HUABAO has been qualified with ISO9000 and CE,
the products always been used in the field of aviation, space, ship, military, railway, machine tool,
ore machine and so on and the products were exported to all over the world.

Application:
Carbon structural steel,
low alloy steel,
stainless steel,
cast iron,
non-ferrous metals (copper, aluminum, titanium and its alloy castings, forgings, etc.),
welding parts,
tooling,
machining parts.
automotive and aerospace tooling,
paper mill machinery,
mining machine，
turbine，
hydro-turbine and power generation equipment,
pumps,
gear boxes,
machine tool building and repair,
manufacturing of large precision components and parts,
Aviation,
Military,
Railway,
Metallurgy,
Roller,ect.
axis,
shaft,
sphere,
runner plate，
disk,
hydraulic cylinder，
electronics,
machinery,
automobile,
shipbuilding，
Textile Machinery，
Food Machinery，
Printing Machinery，
Petroleum Machinery，
Pharmaceutical Machinery

Huabao machinery co., ltd
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250014
Contact: Mr. Brady
Position:sales manager
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:info@vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
http://www.vsrsuperfinishing.com

2014年6月21日星期六

HB-vibratory stress reief/relaxition of residual stress

HB-relieving residual stress,welding stress relieving,modification of re...

HB-relieving residual stress/vibratory stress relief-replace thermal way

HB-relaxition of residual stress

HB-reduction of residual stress

HB-welding stress relieving

HB-residual stress reliever

HB-residual stress relieving equipment

HB-vibratory stress reliever

HB-rotor superfinishing -replace polishing,grinding,rolling,buffing,burn...

Huabao machinery co., ltd
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:brady0086@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady
Position:sales manager

Great Innovation For Metallic Surface Superfinishing &
Provide Complex Problems Solutions

Superfinishing Equipment

Great innovation for superfinishing;replace polishing,grinding,rolling;non-abrasive superfinishing.....

The brief:
1. Obtain surface roughness less than Ra0.1 easily;
2. Suitable for different shapes, such as cylindrical, internal, rotor, curved and spherical, axis,etc;
3. Suitable for all kinds of materials, such as carbon steel, aluminum alloy, copper, etc;
4.Suitable for different industries, such as Turbine, Mining machinery, Mechanical valve, Petroleum Machinery, Bearing mechanical, Mold, Paper machinery, Pharmaceutical Machinery centrifuge, Piston rod, Hydraulic cylinder, Helical rod, Metallurgical Machinery, Wind power, Hydropower, Motor.
5.Can be used in all kinds of machine tools, such as lathe, grinding machine, boring machine, milling machine, planning machine, spherical lathe and CNC machine tools, ect;
6. Just one time, improve production efficiency greatly;
7. Components: tool assembly and control-center;
8. Improve the micro-hardness 20%;
9. Improve the wear-resistance;
10. Improve the fatigue life 5 ~100 times;
11. Suitable for the hardness below HRC65;
12. Improve corrosion resistance;
13. It's a nonabrasive process, without abrasive, felt, lapping compounds and hard work.
14.Relieve the residual stress greatly;
15.Long service life of tool and workpieces;
16. It saves time, money and energy;
17. No sawdust and sawdust wastes occurred,no noise and damage to the environment;
18.Easy to operate.

The principle:
According to metallic materials cold plastic deformation in the normal temperature and apply HB-superfinish equipment to superfinish the surface without any abrasive to reach desirable roughness,this process just like ironing clothes.
The process:
Firstly, make the workpiece pre-machining in the general purpose machine, then apply HB-super finishing equipment again, the roughness will reach less than Ra0.1 easily, just like ironing the clothes and a kind of compressive stress created on the surface at the same time, the micro-hardness will be improved more than 20%, the wear resistance will be improved greatly and the life will be improved 5 ~10 times.

The description:
This equipment including two parts, one is cutter, the other is control center,
the cutter is controlled by control center,
there is a unstable ball which made from a special materials on the cutter head,
during process, the ball impacts the surface 30,000 times per second with very little pressure about 2.5N,
the temperature is little higher than the normal temperature,
it's a nonabrassive process, without abrasive, felt, lapping compounds and hardwork,
save time and cost greatly, and very environmental,
it's very different from the rolling, polishing, grinding and other process,
more precisely, it just like ironing the clothes, never remove any materials from the surface.

Huabao machinery co., ltd
http://www.vsrsuperfinishing.com
E-mail:brady0086@hotmail.com
TEL: +86 531 58761725
FAX: +86 531 88022270
CELL: +86 15866605088
E-mail:vsrsuperfinishing@hotmail.com
MSN: brady0086@hotmail.com
Skype: brady0086
ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
Contact: Mr. Brady
Position:sales manager

HB-cylindrical superfinishing attachment

HB-superfinishing technoloy-replace grinding,polishing,rolling,buffing,b...

cylidrincal superfinishing technology

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

HB-sphere/ball super finishing equipment

2014年6月20日星期五

HB-relieving residual stress machine

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-residual stress reliever

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-relieving stress/stress relieving/welding stress relieving

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-relieving residual stress/vibratory stress relief-replace thermal way

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-residual stress relieving equipment

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-vibratory stress reief/relaxition of residual stress

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

2014年6月19日星期四

HB-shaft superfinishing result test

HB-superfinishing equipment,the most advanced superfinishing technology for metal surface,the equipment impacts the workpiece surface by the head vibrating,obtain surface quality Ra0.1 easily,relieve the residual stress,extend using life more than 5 times,improve hardness more than 20%,improve wear resistant,improve anti-corrosive.during the process,no abrasive,just general machining oil,just one time,highest production efficiency.

HB-cylinlder superfinishing result test

roughness test before superfinishing

HB-cylindrical/shaft/roll/cylinder superfinishing equipment

HB-size test after superfinishing

HB-superfinishing result test

relaxition of residual stress

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

relaxition of residual stress

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-relieving residual stress machine

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-relieving residual stress,reduction of residual stress,modification o...

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-residual stress relieving equipment

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-vibratory stress reliever

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

HB-vibratory stress reliever

HB-vibratory stress relieving technology can replace thermal stress relieving way,save time,money,cost and no pollution...........

2014年6月18日星期三

HB-rotor superfinishing equipment

HB-superfinishing technology is the most advanced technology for metal surface superfinishing,it is the great innovation for superfinishing,huabao company is the only holder,during superfinishing,needn't abrasive,no noise,high speed,extend the workpieces using life,improve hardness more than 20%,improve wear resistant,improve anti-corrosive...................